Brocade Flush Mount Rack Kit Installation Procedure (Suppo User Manual download pdf (Page 7)

Flush Mount Rack Kit Installation Procedure 7 of 10

53-1002127-04

Attaching front brackets to a rack

Complete the following steps to install the switch in the rack.

1. Position the switch in the rack (Figure 3), providing temporary support under the switch until the rail kit is fully

secured to the rack.

2. Attach the right front bracket to the right rack upright using three 10-32 x 5/8-in. screws and three retainer nuts

as shown in Figure 3.

3. Attach the left front bracket to the left rack upright using three 10-32 x 5/8-in. screws and three retainer nuts.

4. Tighten all the 10-32 x 5/8-in. screws to a torque of 25 in-lbs. (29 cm-kgs).

FIGURE 3

Attaching front brackets to a rack

5 Screw, 10-32 x 5/8-in., panhead Phillips 6 Retainer nut, 10-32

1 2 3 4 5 6 7 8 9 10

No comments

Brocade Flush Mount Rack Kit Installation Procedure (Suppo User Manual Page 7